Page 1 of 1
Fillister head machine screw slotted
Posted: Thu Apr 13, 2017 3:56 pm
by koen43
Hello,
Is there in the States someone who can help me with some screws
I am looking for:
fillister head machine screws slotted UNF 12-28 lenght 3/4"
fillister head machine screws slotted UNF 12-28 lenght 9/16"
heax head machine screws slotted UNF 12-28 lenght 9/16"
I need 30 of them each
The are in the Ball and ball carburator
Thanks RobN
ps I have tried MWM and americanintegratedsupply.com
Re: Fillister head machine screw slotted
Posted: Thu Apr 13, 2017 10:52 pm
by tankdriver
Check with McMaster-Carr, they have most any, and everything.
https://www.mcmaster.com/#
Re: Fillister head machine screw slotted
Posted: Fri Apr 14, 2017 10:50 am
by koen43
Thanks,
Nothing on there website
I did send them an email
Are there more suppliers?
Regards Rob
Re: Fillister head machine screw slotted
Posted: Fri Apr 14, 2017 1:51 pm
by zepher11
Re: Fillister head machine screw slotted
Posted: Fri Apr 14, 2017 3:22 pm
by koen43
The answere from McMaster
Thank you for considering McMaster-Carr for your machine screws purchase, but we decline to bid. Due to the cost of complying with extensive US export regulations, McMaster-Carr accepts international purchases only from our established international customers.
Re: Fillister head machine screw slotted
Posted: Fri Apr 14, 2017 3:26 pm
by koen43
Thans Zephir,
Send them an email
Re: Fillister head machine screw slotted
Posted: Sat Apr 15, 2017 1:25 am
by tankdriver
If you can't find them, let me know. I'll see about making them and shipping them to you. Only problem, is they will be blued, and not plated. And I can't make as many as you require,
Re: Fillister head machine screw slotted
Posted: Sat Apr 15, 2017 11:34 am
by koen43
answere from Fastenal
Thanks for the update. Unfortunately, I do not see these parts available in the needed thread pitch. I must offer no quote.
Re: Fillister head machine screw slotted
Posted: Sat Apr 15, 2017 6:40 pm
by Kaegi
I am pretty ssure no one makes a 12-28 in slotted fillister head but they do make with Allan drive. also known as socket head screws. they are in a category at Fastenal.com by themselves
Edit: found these in one inch you could cut down. they are black oxide finish too.
https://monsterfastener.com/item/gsfs-238
http://www.brownells.com/gunsmith-tools ... od394.aspx
Re: Fillister head machine screw slotted
Posted: Sun Apr 16, 2017 6:29 pm
by tankdriver
That is why I have access to them. I bought a kit from Bownell's, that had blanks, then you use a die to make it the screw you need.
The ones from Monster, should be your best bet, just cut them to length you need.
Still, both are black, instead or bright.
Re: Fillister head machine screw slotted
Posted: Tue Apr 18, 2017 2:34 am
by FISCH
Try these guys...they carry 1 inch, but might be able to direct you
http://www.carburetion.com/Products/Pro ... -050-228WB
Re: Fillister head machine screw slotted
Posted: Tue Apr 18, 2017 5:45 am
by koen43
placed an order
Thanks Fisch
Let you all know
Re: Fillister head machine screw slotted
Posted: Tue Apr 25, 2017 3:10 pm
by koen43
And today recieved a package
TOP
Thanks everyone