Fillister head machine screw slotted

[koen43]

Hello,

Is there in the States someone who can help me with some screws

I am looking for:

fillister head machine screws slotted UNF 12-28 lenght 3/4"

fillister head machine screws slotted UNF 12-28 lenght 9/16"

heax head machine screws slotted UNF 12-28 lenght 9/16"

I need 30 of them each

The are in the Ball and ball carburator

Thanks RobN

ps I have tried MWM and americanintegratedsupply.com

[tankdriver]

Check with McMaster-Carr, they have most any, and everything.

https://www.mcmaster.com/#

[koen43]

Thanks,

Nothing on there website
I did send them an email

Are there more suppliers?

Regards Rob

[zepher11]

Fastenal has some sizes. May check there:

https://www.fastenal.com/products/details/0177138

[koen43]

The answere from McMaster

Thank you for considering McMaster-Carr for your machine screws purchase, but we decline to bid. Due to the cost of complying with extensive US export regulations, McMaster-Carr accepts international purchases only from our established international customers.

[koen43]

Thans Zephir,

Send them an email

[tankdriver]

If you can't find them, let me know. I'll see about making them and shipping them to you. Only problem, is they will be blued, and not plated. And I can't make as many as you require,

[koen43]

answere from Fastenal

Thanks for the update. Unfortunately, I do not see these parts available in the needed thread pitch. I must offer no quote.

[Kaegi]

I am pretty ssure no one makes a 12-28 in slotted fillister head but they do make with Allan drive. also known as socket head screws. they are in a category at Fastenal.com by themselves

Edit: found these in one inch you could cut down. they are black oxide finish too.
https://monsterfastener.com/item/gsfs-238

http://www.brownells.com/gunsmith-tools ... od394.aspx

[tankdriver]

That is why I have access to them. I bought a kit from Bownell's, that had blanks, then you use a die to make it the screw you need.

The ones from Monster, should be your best bet, just cut them to length you need.

Still, both are black, instead or bright.

[FISCH]

Try these guys...they carry 1 inch, but might be able to direct you

http://www.carburetion.com/Products/Pro ... -050-228WB

[koen43]

placed an order

Thanks Fisch

Let you all know

[koen43]

And today recieved a package

TOP

Thanks everyone