ww2dodge.com Forum

Can anyone help identify which WW2 truck some large fan belts fit - they were made by the Dayton Rubber Co (Dayco since 1960) and carry the following info:

Dayton 88GB337P5

S3639

MARKED A3

1" WIDE TOP

5/8 WIDE BOTTOM

5/8" DEEP

OUTSIDE CIRCUMFERENCE 62"

===

I believe that 88 part number is an old Mack number and all currently available catalogues don't help so they relate to an obsolete application.

I think they may come under the following NSN:

3030-00-253-8402

3030-00-253-8402 Characteristics Data
MRC Criteria Characteristic
MATT MATERIAL FIBER AND RUBBER BODY
ADZK STRENGTHENING FEATURE FIBER CORD
ADZC ENVIRONMENTAL PROTECTION HEAT RESISTANT AND

OIL RESISTANT
STYL STYLE DESIGNATOR A1 PLAIN
ADVR ANGLE IN DEG 41.0
AKGF NOMINAL WIDTH 1.016 INCHES
AKGJ NOMINAL EFFECTIVE OUTSIDE LENGTH 62.000 INCHES
AGLD PERFORMANCE TYPE HEAVY DUTY


Mfer's Numbers:

158T
158TG
33R79
347T
88GB330P119
88GB337P5
89GB24
===============

Thanks in advance.

For the sake of completing this thread, I think they go to Mack NR models and some Cat D8 dozers.