Page 1 of 1
Wood Cab Mount Blocks
Posted: Tue Apr 29, 2008 5:06 am
by wareagle4590
Looking for some help with the size of the cab mounting blocks for a 1941 WC-12 or so Dodge 1/2 ton 4x4 truck.
I've seen 4" cube quoted
Posted: Tue Apr 29, 2008 5:31 am
by Gordon_M
Not sure though, never had to find / make any myself
Re: Wood Cab Mount Blocks
Posted: Tue Apr 29, 2008 12:31 pm
by brian
I'd just by a set from midwest, no sense re enventing the wheel,
BB
Re: Wood Cab Mount Blocks
Posted: Tue Apr 29, 2008 9:38 pm
by Ernie Baals
Hi
Mine were about 2 1/2 inches thick about 4 inch square.
thanks
Ernie
Re: Wood Cab Mount Blocks
Posted: Sat May 03, 2008 12:44 am
by Ken J
I bought some new ones from VPW, although I'm sure Midwest makes the same thing.
They weren't square, and they had steps milled in. They were made of oak, but don't know which type of oak.
The thickness of mine is 1 1/2"; the long inside is 4"; the front (shown below) is 3 1/2". I can't get the back or outside dimensions right now.
If you make them too thick, the cowl will be too high and will make the hood align improperly. Plus, you spring bolts may turn out too short.