Page 1 of 1
Throttle pedal mounting
Posted: Sun May 09, 2021 6:09 am
by MikeKB
Can anyone post photo(s) of the throttle pedal on how it is affixed to the hinge and how it connects to the throttle linkage.
Mine was missing and although I got a replacement from VPW, I'm not sure how to mount it...
Thanks
Mike
Re: Throttle pedal mounting
Posted: Sun May 09, 2021 9:34 am
by Gordon_M
Don't have any images Mike, but I thought it was two screws into the floor and a pin / split pin for the connection.
The military one is MUCH better than the civilian, which is two metal stud with ball ends, a ball end on the linkage, and a cast rubber pedal with three ball sockets, so the balls have to be forced into the sockets and then you have to persuade them to stay in. If your setup isn't obvious you may have mixed military and civilian parts which would be very confusing.
Re: Throttle pedal mounting
Posted: Sun May 09, 2021 8:36 pm
by Andersun
The pedal bolts on the hinge in 2 places. The top of the pedal has a connection for a cotter pin which connects the pedal to the linkage.
Re: Throttle pedal mounting
Posted: Tue May 11, 2021 12:30 am
by JBizal
If you have a 1/2 ton, I have the ball studs in stock.
Midwest Military, Inc.
John
Re: Throttle pedal mounting
Posted: Sat Jun 12, 2021 6:04 am
by MikeKB
Thanks for the info.