Page 1 of 1
U bolt question
Posted: Mon Feb 11, 2019 4:32 pm
by Kaegi
I am considering have a batch of correct, forged u bolts made for 3/4 tons. I dont know of anyone selling the correct type. Do you guys know of any suppliers with a ton of NOS they are selling? If they are out there I don't want make the investment in a batch of new ones and flood the market.
They will be made in the US
Re: U bolt question
Posted: Sun Feb 24, 2019 5:46 pm
by Kaegi
My next question is lengths. my only 3/4 ton samples from a WC53 are 8.125" for the front drivers side and 8.625" for front passenger side and both rears. The measurements taken from inside the U. I think all 3/4 tons would be the same but if some of you could measure would be helpful. Or if someone has the parts description page they could load that should have the lengths
Thanks, Steve
Re: U bolt question
Posted: Mon Feb 25, 2019 9:23 pm
by Adam in Wa
I got the same measurements on my WC53; 8-1/8 left front. 8-5/8 for the others. Threads are 2-1/2 long.
Re: U bolt question
Posted: Tue Feb 26, 2019 7:21 am
by Kaegi
ok so we settled what the 53s are. thanks.