Page 1 of 1
Oil Preasure Line
Posted: Wed Feb 22, 2017 6:17 pm
by rgus
Can someone post a picture of the correct routing of the oil line through the firewall to the oil gage. Specifically where it goes through the firewall on the engine side and the method of securing it?
Thanks Guys
Re: Oil Preasure Line
Posted: Wed Feb 22, 2017 6:36 pm
by wc63-1944
If you let me have your email address I'll send you some. I've tried posting photos on here several times, but never managed it yet!
Cheers,
Chris.
Re: Oil Preasure Line
Posted: Wed Feb 22, 2017 7:16 pm
by rgus
sure email is
rgus48@gmail.com
thanks Chris
Re: Oil Preasure Line
Posted: Wed Feb 22, 2017 9:43 pm
by wc63-1944
Mail sent.
Chris.
Re: Oil Preasure Line
Posted: Wed Feb 22, 2017 10:47 pm
by rgus
Guys thanks for all the help. I thought I had it right but wasn't sure.
I think I am about ready to set this puppy back on the frame.
Thanks Again.
Re: Oil Preasure Line
Posted: Thu Feb 23, 2017 12:55 pm
by ng19delta
This was made based on the original photographs I could find in the manuals... Hardest part was the bend at the top- went in several different directions at once!
Scott
Re: Oil Preasure Line
Posted: Tue Mar 07, 2017 3:43 am
by Kaegi
Ngdelta pics looks like what all mine have looked like
