6 volt charging

From VC-1 to WC64-KD.
Post Reply
egdod
Technician 4th Grade
Technician 4th Grade
Posts: 99
Joined: Wed Apr 30, 2008 6:35 pm
Location: Normandy

6 volt charging

Post by egdod »

Quick question i either have a naff battery or my generator is not performing as it should before i do anything
I need to know what the generator should be producing…from memory around 8 volts rings a bell….right or wrong?

Regards
Dave
Phil P
Master Sergeant
Master Sergeant
Posts: 2101
Joined: Fri Aug 04, 2006 9:10 pm
My garage: 1944 Leyland Hippo MKII 6x4 GS 10 tonner
1944 Willys MB
1942 Dodge WC51 Weapon Carrier (US Navy)
1937 Sunbeam bicycle
1926 BSA 500 Blue Star Sport motorcycle
1942 Ford GPW
Location: Staffordshire UK

Re: 6 volt charging

Post by Phil P »

It should charge at just under 8 volts otherwise it just boils the battery. It doesnt do it any harm but it is 9 volts it will buckle the plates eventually. The generator or dynamo will go up to 70 volts for a short time but can charge at 14 volts all day so you can change your system at 12 volts IF you change everything else. The wiring should take the load because it was designed for 6 volts. As volts increase so amps come down and is the amps that do the damage heat wise.

Phil P

I have just returned to the group, but l am not driving my Dodges or jeeps after my stroke almost 9 years ago. i let my son in law drive me around though l am letting my grandson convert my '41 Dodge Luxury Liner with a Rover V8 and automatic gearbox instead of the Dodge flat head 6. That is the spare for WC51. Then l can drive it.
1944 Leyland Hippo 10 tonner (Ex 79th Armoured Division) 'Elly J'
21 December 1942 Dodge WC51 (US Navy South Pacific)
'Spirit of USS Arizona'
1927 BSA 500cc 'Blue Star' m/c
8th January 1944 US Navy MB. 'Olive's Taxi'
Feb '42 Ford GPW 'Yella Boyd'
Post Reply