Help, Bubba butchered a motor mount!

From VC-1 to WC64-KD.
Post Reply
Lew Ladwig
Technician 5th Grade
Technician 5th Grade
Posts: 23
Joined: Wed Aug 08, 2018 11:28 pm
My garage: 45 WC52
45GPW
44M29C WEASEL

Help, Bubba butchered a motor mount!

Post by Lew Ladwig »

The PO cut the right rear motor mount! Is this cas iron or cast steel?
Ideas?
User avatar
Gordon_M
Lieutenant General
Lieutenant General
Posts: 2798
Joined: Wed Mar 08, 2006 1:43 pm
Location: Falkirk, Central Scotland
Contact:

Re: Help, Bubba butchered a motor mount!

Post by Gordon_M »

Cast steel, should weld if the bits are there. Rob one off a donor if not. Gordon
Gordon, in Scotland

( Now officially given up on any form of politics )
Lew Ladwig
Technician 5th Grade
Technician 5th Grade
Posts: 23
Joined: Wed Aug 08, 2018 11:28 pm
My garage: 45 WC52
45GPW
44M29C WEASEL

Re: Help, Bubba butchered a motor mount!

Post by Lew Ladwig »

Sweet. I can repair steel!
Lew Ladwig
Technician 5th Grade
Technician 5th Grade
Posts: 23
Joined: Wed Aug 08, 2018 11:28 pm
My garage: 45 WC52
45GPW
44M29C WEASEL

Re: Help, Bubba butchered a motor mount!

Post by Lew Ladwig »

Anyone have a picture of the RR motor mount? Dimensions wod be great!
Post Reply