Transfer case bearing numbers

From VC-1 to WC64-KD.
Post Reply
Adam in Wa
Sergeant
Sergeant
Posts: 169
Joined: Tue Mar 13, 2018 10:04 pm
My garage: 48 Power Wagon
42 WC53
71 Dodge Challenger R/T
Location: Newport Washington

Transfer case bearing numbers

Post by Adam in Wa »

Does anybody know the bearing numbers (cups & cones) for the single speed T/C? 3/4 Ton. There are six of them, all the same size...

Update: This is a one speed 1/2 ton t/c, although I found it had “3/4” stamped into the case. I pulled the cups & cones out. The cups were Timkin 14276, and the cones were 14124. When I looked these up on Timkin’s web site it showed the 14124 bearing with a different cup. The 14276 cup was paired with a 14125A bearing. The 14124 & 14125A have exactly the same dimensions, but the 14124 has a slightly higher load rating.

Bearing cups: 14276
Bearings:14124 or 14125A
Last edited by Adam in Wa on Sun Jun 16, 2019 4:28 am, edited 3 times in total.
Ray Edsall
Technical Sergeant
Technical Sergeant
Posts: 1252
Joined: Fri Apr 07, 2006 4:35 am
Location: Australia

Re: Transfer case bearing numbers

Post by Ray Edsall »

G,Day Adam . Cup is 698394 . Bower Bt 12124 or Timkins 12124 . Cone is 912161 , Bower , Bt 24720. Timkins 24720 . Hope this helps . Ray
Adam in Wa
Sergeant
Sergeant
Posts: 169
Joined: Tue Mar 13, 2018 10:04 pm
My garage: 48 Power Wagon
42 WC53
71 Dodge Challenger R/T
Location: Newport Washington

Re: Transfer case bearing numbers

Post by Adam in Wa »

Great. Thank you, that is a big help.
Post Reply