We have just finished making the 3/4 and 1 1/2 ton open cab WC cargo box rear crossmember and the two center floor supports. Photos and information at http://www.midwestmil.com Featured parts pages.
Regards, John
New Parts available.
-
- Technician 4th Grade
- Posts: 67
- Joined: Tue Mar 28, 2006 3:28 pm
- Location: Centerville, UT - USA
- Contact:
Just great John...
Now you tell me, after I spent hours with a bench vice, bottle jack, and mig welder "saving" the floor supports on my WC-51 project!
I may buy one anyway... certainly will be contacting you soon for the rubber spacers that go underneath.
Thanks for re-creating these hard to find bits.
I may buy one anyway... certainly will be contacting you soon for the rubber spacers that go underneath.
Thanks for re-creating these hard to find bits.
-
- Staff Sergeant
- Posts: 630
- Joined: Tue Mar 28, 2006 5:33 pm
- Location: So Cal
WC parts
John,
Which page of parts Went to the last two pages and nothing.
Thanks for the push in the right direction! This, too, could save me lots of hours trying to get the bolts, ect out of the one I have.
Jim M
Which page of parts Went to the last two pages and nothing.
Thanks for the push in the right direction! This, too, could save me lots of hours trying to get the bolts, ect out of the one I have.
Jim M
proud owner of a 1942 WC 51 and now a 1942 WC 56!
-
- Technician 5th Grade
- Posts: 25
- Joined: Tue Apr 04, 2006 3:20 am
- Location: Catlett VA USA
Eventually
John,
Sooner or later you'll be producing enough parts to open a new Mound Road.
Sooner or later you'll be producing enough parts to open a new Mound Road.
'42 WC51, '77 M880, lots of Voortrekker powerplants-Eeegad! they're procreating