Fourth VC contract - maybe not

Post Reply
User avatar
Gordon_M
Lieutenant General
Lieutenant General
Posts: 2798
Joined: Wed Mar 08, 2006 1:43 pm
Location: Falkirk, Central Scotland
Contact:

Fourth VC contract - maybe not

Post by Gordon_M »

Well I've done some research and updated some stuff.

First, thanks to Fred Coldwell for the better image of the VC listing.

http://www.gwim2.pwp.blueyonder.co.uk/odatv.pdf

This has given us some changes to numbers and I've updated the VC List accordingly;

http://www.gwim2.pwp.blueyonder.co.uk/vclist.htm

Second, it appears that Ernie was right, in that the 398-QM-8039 contract that mentions VC2 and VC3 on the listing, but with T207 engines, is in fact a T207 series contract starting at chassis 8,644,701 ( about sixty chassis higher than the last known T202 VC. I dug out my copy of an early T207 Parts List from September 1940 to verify this;

Image

It is still possible there was some crossover, but for me that starting chassis number strongly suggests these were T-207 trucks
Gordon, in Scotland

( Now officially given up on any form of politics )
User avatar
EJOWest
Technician 3rd Grade
Technician 3rd Grade
Posts: 313
Joined: Fri Nov 17, 2006 1:17 pm
Location: NorCal

Re: Fourth VC contract - maybe not

Post by EJOWest »

I picked up an old copy of Army Motors magazine at Tower Park last week that had a few articles on the development of the VC. I believe the magazine was published in 1990. I don't know where they got their information but the articles states that the first WC's were WC sheetmetal on VC chassis.

Ernie
User avatar
Gordon_M
Lieutenant General
Lieutenant General
Posts: 2798
Joined: Wed Mar 08, 2006 1:43 pm
Location: Falkirk, Central Scotland
Contact:

Re: Fourth VC contract - maybe not

Post by Gordon_M »

I've seen the famous shot of an early WC sitting on a VC front axle - I suppose there would have been a few transitions one way or the other.

I recall the last of the VCs were fitted with T207 engines.
Gordon, in Scotland

( Now officially given up on any form of politics )
wallyws

Re: Fourth VC contract - maybe not

Post by wallyws »

Both my VC6s are in Aug -40 and are T202? WALLY
User avatar
Gordon_M
Lieutenant General
Lieutenant General
Posts: 2798
Joined: Wed Mar 08, 2006 1:43 pm
Location: Falkirk, Central Scotland
Contact:

Re: Fourth VC contract - maybe not

Post by Gordon_M »

wallyws wrote:Both my VC6s are in Aug -40 and are T202? WALLY

Yup,

the VC 6 is unique in that it wasn't prototyped till the second VC production batch / contract, and then the production vehicles were made in the third batch / contract.

VC and VF production must have finished August / September, but there was an export batch of VF T203B which were made right at the end of the model year too - possibly spilling into 1941 model year.
Gordon, in Scotland

( Now officially given up on any form of politics )
Steve K. CALIF
Sergeant
Sergeant
Posts: 159
Joined: Mon Jul 31, 2006 6:19 pm
Location: Madera, CA

Re: Fourth VC contract - maybe not

Post by Steve K. CALIF »

Wally, you have two of the VC6 models now?? Steve K.
Fred Coldwell
Technician 4th Grade
Technician 4th Grade
Posts: 123
Joined: Sun Dec 20, 2009 4:51 am

Re: Fourth VC contract - maybe not

Post by Fred Coldwell »

EJOWest wrote:I picked up an old copy of Army Motors magazine at Tower Park last week that had a few articles on the development of the VC. I believe the magazine was published in 1990. I don't know where they got their information but the articles states that the first WC's were WC sheetmetal on VC chassis. Ernie
Hi Ernie:

Here is some visible evidence of the truth of that statement:

Image

The truck wears a 1940 Michigan Manufacturer's license plate and has WC 1/2 ton sheet metal on a VC chassis. I think this photo was taken at the "backyard" test track next to Chrysler's Mound Road Factory.
Fred Coldwell
Denver, Colorado U.S.A.
1944 T233 Command Car prototype
1945 T233 Utility Truck pilot model
Post Reply