CCKW front diff.
How much clearance should there be between the front axle outer section and the bushing (part #3659778) that fits into the inside of the front spindle so as to support the axle?
I am not sure if my bushes are worn and if I machine up replacements unsure of the clearance specs for the bush.
Thanks
Clearance between front axle and spindle bushing?
-
Darrin W
- Technician 4th Grade
- Posts: 80
- Joined: Tue Jan 01, 2008 10:03 am
- Location: Victoria, Australia
Clearance between front axle and spindle bushing?
Darrin
42/43 WC-57 Command Car
43 GPW + 43 MBT to carry all the family stuff
42 CCKW hard cabin cargo
41 Australian LP2 Bren Gun Carrier (field modified 3" Mortar carrier)
44 C60L CMP 3 tonne Cargo Truck
42/43 WC-57 Command Car
43 GPW + 43 MBT to carry all the family stuff
42 CCKW hard cabin cargo
41 Australian LP2 Bren Gun Carrier (field modified 3" Mortar carrier)
44 C60L CMP 3 tonne Cargo Truck
-
RANGER
- 1st Sergeant
- Posts: 6510
- Joined: Sat Jul 01, 2006 6:29 pm
- Location: Nearest Motor Pool
Re: Clearance between front axle and spindle bushing?
Darrin W wrote:CCKW front diff.
How much clearance should there be between the front axle outer section and the bushing (part #3659778) that fits into the inside of the front spindle so as to support the axle?
I am not sure if my bushes are worn and if I machine up replacements unsure of the clearance specs for the bush.
Thanks
Clearance between outer Banjo Axle Shaft and Spindle Bushing is 0.024" maximum.
US ARMY HONOR GRADUATE MECHANIC, Restorer of fine Jeeps, MV's, MVPA 40+yrs, DAV, Army Aircrew member, Donor to Military Museums & CAF, MV Hobby since 1945
Other Hobby- Army Air Force & Busting Big Ass Military Imposters-Good at it
Other Hobby- Army Air Force & Busting Big Ass Military Imposters-Good at it