Dodge WC Engine block or good engine for rebuild

'FOR SALE' and 'WANTED' Make sure the LOCATION section of your profile is completed, or at least post your location on individual adverts.
Post Reply
Mark GB
Corporal
Corporal
Posts: 49
Joined: Tue Mar 28, 2006 1:06 pm
Location: UK - just about in the middle

Dodge WC Engine block or good engine for rebuild

Post by Mark GB »

I'm looking for a good take out motor to rebuild or engine block. Anyone out there have one or know of one. I'm in the UK so would prefer a source over here. However any help grealty appreciated.

Thanks Mark
Drove it, used it, broke it, fixed it, sold it - looking for another
Guest

Post by Guest »

this is an ebay item in the U.S.A. but if you had somebody that could pick it up and send it to you it might be worth it.
then again maybe not.
anyway here is the link.
Bill

120005374391
Mark GB
Corporal
Corporal
Posts: 49
Joined: Tue Mar 28, 2006 1:06 pm
Location: UK - just about in the middle

Post by Mark GB »

Thanks Bill

Anyone out there is Eastern Washington state who could help me out. I'll pay for shipping and donate something for your time!

Thanks Mark
Drove it, used it, broke it, fixed it, sold it - looking for another
Mark GB
Corporal
Corporal
Posts: 49
Joined: Tue Mar 28, 2006 1:06 pm
Location: UK - just about in the middle

Post by Mark GB »

Opps sorry Western Washingto State! - big place bets thats a few miles difference
Drove it, used it, broke it, fixed it, sold it - looking for another
Guest

Post by Guest »

I am in Western WA. the Tcase is 6x6 dodge or FF PW, the axles are early 1/2 ton. Did you find out if the block is the right number for you? might be a 217. I might be able to pick and drop at a shipper for you find out what town it is in. Steve
Mark GB
Corporal
Corporal
Posts: 49
Joined: Tue Mar 28, 2006 1:06 pm
Location: UK - just about in the middle

Thanks

Post by Mark GB »

I'll find out the engine No - only realy want the engine - axles etc not needed. It seems tryining to find a rebuild motor over here is a bit difficult.


I'll find out what town the guys in.

Thanks again Mark
Drove it, used it, broke it, fixed it, sold it - looking for another
Kaegi

block

Post by Kaegi »

Forgot to put my name on the las post. I know a shipper in Seattle who can pallate whatever you buy and ship for you let me know. I would jsut need gas money. Steve
Mark GB
Corporal
Corporal
Posts: 49
Joined: Tue Mar 28, 2006 1:06 pm
Location: UK - just about in the middle

Thanks everyone

Post by Mark GB »

I'm trying to get a reply from the guy.

All I really need is the crank, camshaft, and piston rods (con rods), as i've found a NOS engine block, psitons etc and want to build a new(ish) engine from NOS parts. But been told I wont find a crank, cam and con rods.
Drove it, used it, broke it, fixed it, sold it - looking for another
Enigma
Sergeant
Sergeant
Posts: 158
Joined: Wed Mar 29, 2006 12:08 pm
Location: Netherlands

Re: Thanks everyone

Post by Enigma »

Mark GB wrote:I'm trying to get a reply from the guy.

All I really need is the crank, camshaft, and piston rods (con rods), as i've found a NOS engine block, psitons etc and want to build a new(ish) engine from NOS parts. But been told I wont find a crank, cam and con rods.
Hi Mark
Did you contact Wildenberg in Holland?
He is going to Beltring.
wildenberg@planet.nl
Mark GB
Corporal
Corporal
Posts: 49
Joined: Tue Mar 28, 2006 1:06 pm
Location: UK - just about in the middle

Thanks Enigma

Post by Mark GB »

no I'll try him - unfortunately I don't think I'll make Beltrng - family 21st B'day and work in the week.

looking to try Sunday early, fingers crossed. I'll get in touch with him via email anyway
Drove it, used it, broke it, fixed it, sold it - looking for another
Guest

Post by Guest »

Mark
Check out this guy he has a lot of parts may be able to help is in the U.S.A.
Bill

http://www.jobrated.com/index.html
Post Reply