New Parts available.

'FOR SALE' and 'WANTED' Make sure the LOCATION section of your profile is completed, or at least post your location on individual adverts.
JBizal

New Parts available.

Post by JBizal »

We have just finished making the 3/4 and 1 1/2 ton open cab WC cargo box rear crossmember and the two center floor supports. Photos and information at http://www.midwestmil.com Featured parts pages.
Regards, John
Chris Davis
Technician 4th Grade
Technician 4th Grade
Posts: 67
Joined: Tue Mar 28, 2006 5:28 pm
Location: Centerville, UT - USA

Just great John...

Post by Chris Davis »

Now you tell me, after I spent hours with a bench vice, bottle jack, and mig welder "saving" the floor supports on my WC-51 project!

I may buy one anyway... certainly will be contacting you soon for the rubber spacers that go underneath.

Thanks for re-creating these hard to find bits.
Chris Davis
'45 WC-51
MVPA# 20000
Centerville, UT
http://www.surplustrucks.com/WC51/WC51Home.htm
Jim M
Staff Sergeant
Staff Sergeant
Posts: 630
Joined: Tue Mar 28, 2006 7:33 pm
Location: So Cal

WC parts

Post by Jim M »

John,
Which page of parts :) Went to the last two pages and nothing.
Thanks for the push in the right direction! This, too, could save me lots of hours trying to get the bolts, ect out of the one I have.

Jim M
proud owner of a 1942 WC 51 and now a 1942 WC 56!
Mike in VA, USA
Technician 5th Grade
Technician 5th Grade
Posts: 25
Joined: Tue Apr 04, 2006 5:20 am
Location: Catlett VA USA

Eventually

Post by Mike in VA, USA »

John,
Sooner or later you'll be producing enough parts to open a new Mound Road.
'42 WC51, '77 M880, lots of Voortrekker powerplants-Eeegad! they're procreating