Dodge VC3 identification plate

DODGEWC53
Technician 4th Grade
Technician 4th Grade
Posts: 101
Joined: Tue Mar 28, 2006 7:19 pm
Location: Belgium

Dodge VC3 identification plate

Post by DODGEWC53 »

Hello,

I am looking for a VC3 reproduction identification dash plate, as mine was missing. :(
Anyone knows ho makes them?

Thanks

Eric
Eric

'42 WC53; '41 WC43;'43 D15; '43 WC56;
'44 WC54; '41 panel; '39 D12; '40 VC3
'44 GPW ;'44 Converto ;

Belgium
User avatar
Gordon_M
Lieutenant General
Lieutenant General
Posts: 2709
Joined: Wed Mar 08, 2006 3:43 pm
Location: Falkirk, Central Scotland

Re: Dodge VC3 identification plate

Post by Gordon_M »

I'm not 100% sure but I think they are the same as the early 1/2 ton, just located differently.

Maybe Robert at DATAPLATES4U has them?
Gordon, in Scotland

( Now officially given up on any form of politics )
User avatar
Leonard Nettles
Technician 3rd Grade
Technician 3rd Grade
Posts: 510
Joined: Sat Oct 25, 2008 10:19 pm
Location: Orange County, California

Re: Dodge VC3 identification plate

Post by Leonard Nettles »

Gordon and Eric I posted a picture of the dash plate on my VC1 which will give you an idea of what is stamped on the plate. You can view the plate and other images of my VC1 restoration by going to www.imageevents.com/leonardnettles/vc1dashplate.
Leonard Nettles

18212 East Santa Clara Ave.

Santa Ana, Ca 92705

Email ln.lja@sbcglobal.net

Cell - 714-231-2570
Home - 714 505-5773
User avatar
Gordon_M
Lieutenant General
Lieutenant General
Posts: 2709
Joined: Wed Mar 08, 2006 3:43 pm
Location: Falkirk, Central Scotland

Re: Dodge VC3 identification plate

Post by Gordon_M »

Thanks

Steve Greenberg let me have the original serial plate for my VC3, and I just copied the stamping.

Because most of the printing was long gone I couldn't be sure that all the details printed on it were exactly the same as the early half ton, but the plate was the same size, stamping went in the same boxes, etc, etc.

Anyone know for sure of any differences?
Gordon, in Scotland

( Now officially given up on any form of politics )
User avatar
EJOWest
Technician 3rd Grade
Technician 3rd Grade
Posts: 313
Joined: Fri Nov 17, 2006 3:17 pm
Location: NorCal

Re: Dodge VC3 identification plate

Post by EJOWest »

Here is a VC5 data Plate, although faded the printing is still visible.
Ernie

Image