Seat measurements
-
- Sergeant
- Posts: 152
- Joined: Tue Jul 20, 2010 3:12 am
- My garage: 1942 WC-53
1943 WC-53-4DOOR
1942 WC-53
And one more WC-53 - Location: Salt Lake City
Re: Seat measurements
On the back of the seat there is the sheet metal. At the bottom on each side it has a radius section that transitions from the rails. Does your jump seat have the same pattern? Does the middle and rear seat have the same radius sheet metal pattern? Also in order for the front seat to clear the map table what is the measurement from the top a the seat down to the bottom of the sheet metal?
1942 WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
-
- Sergeant
- Posts: 152
- Joined: Tue Jul 20, 2010 3:12 am
- My garage: 1942 WC-53
1943 WC-53-4DOOR
1942 WC-53
And one more WC-53 - Location: Salt Lake City
Re: Seat measurements
Hey look what i found
1942 WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
-
- Sergeant
- Posts: 152
- Joined: Tue Jul 20, 2010 3:12 am
- My garage: 1942 WC-53
1943 WC-53-4DOOR
1942 WC-53
And one more WC-53 - Location: Salt Lake City
Re: Seat measurements
1942 WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
-
- Sergeant
- Posts: 152
- Joined: Tue Jul 20, 2010 3:12 am
- My garage: 1942 WC-53
1943 WC-53-4DOOR
1942 WC-53
And one more WC-53 - Location: Salt Lake City
Re: Seat measurements
Ok, so if anyone needs the jump seat sheet metal measurements I have them. My next question, is the back sheet metal pattern the same on the drivers, middle, and rear-with the rear being wider? I would imagine that because the seats don’t fold up it shouldn’t matter. I just think it looks more professional with the radius flange.
1942 WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
-
- Sergeant
- Posts: 170
- Joined: Tue Mar 13, 2018 10:04 pm
- My garage: 48 Power Wagon
42 WC53
71 Dodge Challenger R/T - Location: Newport Washington
Re: Seat measurements
1. Yes, all the seat backs have the same transition detail, from the sheet metal backing, to the vertical tubes.
2. Someone has previously cut off the floor mounting legs off my seat, but the legs were 31-1/2 apart, center to center.
3. The rear seat bottom tubes are 45-3/4 wide (outside to outside) and 14-7/16 apart front to back.
2. Someone has previously cut off the floor mounting legs off my seat, but the legs were 31-1/2 apart, center to center.
3. The rear seat bottom tubes are 45-3/4 wide (outside to outside) and 14-7/16 apart front to back.
-
- Sergeant
- Posts: 170
- Joined: Tue Mar 13, 2018 10:04 pm
- My garage: 48 Power Wagon
42 WC53
71 Dodge Challenger R/T - Location: Newport Washington
Re: Seat measurements
Jump seat:
-
- Sergeant
- Posts: 170
- Joined: Tue Mar 13, 2018 10:04 pm
- My garage: 48 Power Wagon
42 WC53
71 Dodge Challenger R/T - Location: Newport Washington
Re: Seat measurements
I guess my rear seat frame isn’t too bad to save. The bottom springs are shot, but good for dimensions if anyone needs the measurements.
- wc 9 and 12 owner
- Lieutenant General
- Posts: 1394
- Joined: Tue Aug 01, 2006 5:37 am
- My garage: current owner of a WC 9, WC 12, 2 K38s, USMC Willys MB Holden Ambulance, 1943 USMC Willys NOM 12 radio jeep ,wc 27, Cushman package kar, m6 bomb truck, m5 bomb trailer, m1 bomb truck, Ben hur trailer and a few more things
- Location: Atascadero CA
- Contact:
Re: Seat measurements
I was talking with all American canvas who makes springs into doing period correct seats with springs. He needs examples of all the seats
All right they're on our left they're on our right they're in front of us they're behind us they can't get away this time
General Chesty Puller
General Chesty Puller
-
- Sergeant
- Posts: 152
- Joined: Tue Jul 20, 2010 3:12 am
- My garage: 1942 WC-53
1943 WC-53-4DOOR
1942 WC-53
And one more WC-53 - Location: Salt Lake City
Re: Seat measurements
Thank you thank you, it’s just what I needed. I have a few more minor detail measurements. I’ll post some pictures.
Thanks again James
Thanks again James
1942 WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
-
- Sergeant
- Posts: 152
- Joined: Tue Jul 20, 2010 3:12 am
- My garage: 1942 WC-53
1943 WC-53-4DOOR
1942 WC-53
And one more WC-53 - Location: Salt Lake City
Re: Seat measurements
Is the total OD on the back the same as the bottom
1942 WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
-
- Sergeant
- Posts: 152
- Joined: Tue Jul 20, 2010 3:12 am
- My garage: 1942 WC-53
1943 WC-53-4DOOR
1942 WC-53
And one more WC-53 - Location: Salt Lake City
Re: Seat measurements
1942 WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
-
- Sergeant
- Posts: 152
- Joined: Tue Jul 20, 2010 3:12 am
- My garage: 1942 WC-53
1943 WC-53-4DOOR
1942 WC-53
And one more WC-53 - Location: Salt Lake City
Re: Seat measurements
And one last one, is this tube or flat bar?
1942 WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
1943 WC 53 4 Door
an other 1942 WC 53
and one more WC 53
-
- Sergeant
- Posts: 170
- Joined: Tue Mar 13, 2018 10:04 pm
- My garage: 48 Power Wagon
42 WC53
71 Dodge Challenger R/T - Location: Newport Washington
Re: Seat measurements
Plate: 3 x 1-3/4, holes are 1-7/8 center to center
Seat frame is 46-3/4 outside to outside.
-
- Sergeant
- Posts: 170
- Joined: Tue Mar 13, 2018 10:04 pm
- My garage: 48 Power Wagon
42 WC53
71 Dodge Challenger R/T - Location: Newport Washington
Re: Seat measurements
Ten inches along the long side.
-
- Sergeant
- Posts: 170
- Joined: Tue Mar 13, 2018 10:04 pm
- My garage: 48 Power Wagon
42 WC53
71 Dodge Challenger R/T - Location: Newport Washington
Re: Seat measurements
Bonus pic: back sheet metal is twenty inches tall.